Product description
ASA filament 621 2.85 mm 1000 g with new low-warp formula for 3D printers is of superior quality. Real filaments guarantees high-quality and diameter consistent filament, giving you the best 3D printing experience. This special compound of ASA is very easy to print thanks to the low shrinkage, while the filament still has excellent weather resistance. The ASA low-warp is available in a variety of colors on the new 1KG spools spools that are smaller in width.
- Easy to print
- Weather resistant
- Real quality
Specifications
| sku | NLASAB1000MM285 |
|---|---|
| gtin | 8719345015694 |
| Filament properties | |
| Weight filament | 1000 g |
|
Material The base material used in the filament. For more information on the different materials, please check the Filament information page |
ASA |
| Variant | ASA |
| Color | Black |
| Color (on label) | Black |
| Diameter | 2.85 mm |
| Diameter tolerance | 0.05 mm |
| Printing properties | |
| Temperature - extruder | 210 -240 °C |
| Temperature - heated bed | 40 -60 °C |
| Heated bed temp. - Kapton | 90 - 110 °C |
|
Ease of use How much 3D printing experience is recommended before using this material. |
|
|
Printbed adhesion Determines how easy the material adheres to the printbed and can be removed from the bed without damaging either the bed or the print. |
|
|
Printing speed The speed at which the material can be extruded. This is determined by how fast it melts and how viscous it is. |
|
|
Odor How much smell does the filament produce while printing and how bad is the smell. More stars is better |
|
| Material Properties | |
|
Toughness How tough is the material. From 1 star (very brittle) to very tough |
|
|
Impact strength The amount of energy that a material can withstand when a load is suddenly applied to it. It may also be defined as the threshold of force per unit area before the material undergoes fracture/ |
|
|
Deformation temp. How well can the material handle temperatures before it starts to deform. |
|
| Flame-retardant standard | UL94-V0 |
| Tensile Strength | 42 MPa |
| Vicat Softening Temperature | 94 °C |
| Heat deflection temp. | 86 °C |
| Tensile (E) modulus | 1800 MPa |
| Relative density | 1.07 g/cc |
| Spool dimensions | |
| Outer diameter | 200 mm |
| Inner diameter | 50 mm |
| Width | 65 mm |
| Weight spool | 300 g |
| Length filament | 400 m |
| 1 - 9: | excl $ 40.75 |
| 10 - 29: | excl $ 38.75 |
| 30 - : | excl $ 36.75 |
| Need a larger quantity? Contact our Sales department. | |
Related productsRelated products
Discover products that go hand in hand with the ASA Low-Warp filament Black 2.85 mm / 1 kg Real. These are products that have been purchased the most with the ASA Low-Warp filament Black 2.85 mm / 1 kg Real. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.
