allPHA Neutral 3D filament by ColorFabb makes 3D printing greener by enabling your to 3D print a 100% biological materials, which will break down in any biotope without leaving microplastics. PolyHydroxyAlkanoates (PHA) is an end product of fermentation of sugars and oils by bacteria, which can be fully consumed by micro-organisms. Compared to PLA, which is only biodegradable in industrial composting environments, this is a big step forward.
When 3D printed, allPHA 3D filament will result in a very tough 3D print with amazing inter-layer bonding. The resulting 3D prints have a high heat deflection temperature of more than 120 °C and the material can be printed on most 3D printers at a temperature of around 200 °C. The 3D filament can adhere too much to substrate materials, so avoid 3D printing on build surfaces with that. The material is prone to warping if not adhered well to the build platform, so we recommend using 3DLAC with a cold glass heated bed and using a brim.
|Weight filament||750 g|
The base material used in the filament. For more information on the different materials, please check the Filament information page
|Color (on label)||Neutral|
|Diameter tolerance||0.1 mm|
|Temperature - extruder||190-200 °C|
|Temperature - heated bed||0 °C|
|1 - 9:||excl $ 44|
|10 - 29:||excl $ 41.75|
|30 - :||excl $ 39.50|
|Need a larger quantity? Contact our Sales department.|
Discover products that go hand in hand with the allPHA Neutral filament - 1.75 mm / 750 g. These are products that have been purchased the most with the allPHA Neutral filament - 1.75 mm / 750 g. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.