allPHA White filament
2.85 mm / 750 g

100% biodegradable filament 3D filament with excellent layer adhesion
$ 43  excl VAT
Only 5 left, order now!
Stock - NL: 5
Others also bought:
Adhesion spray 400ml|ABS, PLA and PETG
Adhesion spray 400ml
Your best defense against warping and prints loosening from the bed
$ 8.80
Plus Adhesion spray 100ml|ABS, PLA and PETG
Plus Adhesion spray 100ml
Your best defense against warping and prints loosening from the bed
$ 6.60
Filament cutter tool
Filament cutter tool
Cut filament and electrical wire easily with this very sharp cutter
$ 4.30
Modifi3d repair and modification tool
Modifi3d repair and modification tool
Clean, repair and modify your 3D prints using this user-friendly tool
$ 30.75

Product description

allPHA White 3D filament by ColorFabb makes 3D printing greener by enabling your to 3D print a 100% biological materials, which will break down in any biotope without leaving microplastics. PolyHydroxyAlkanoates (PHA) is an end product of fermentation of sugars and oils by bacteria, which can be fully consumed by micro-organisms. Compared to PLA, which is only biodegradable in industrial composting environments, this is a big step forward.

When 3D printed, allPHA 3D filament will result in a very tough 3D print with amazing inter-layer bonding. The resulting 3D prints have a high heat deflection temperature of more than 120 °C and the material can be printed on most 3D printers at a temperature of around 200 °C. The 3D filament can adhere too much to substrate materials, so avoid 3D printing on build surfaces with that. The material is prone to warping if not adhered well to the build platform, so we recommend using 3DLAC with a cold glass heated bed and using a brim.

  • 100% biological materials
  • 100% biodegradable
  • High heat deflection temperature
  • Tough 3D prints
  • Great layer adhesion


sku CFAPHAW285MM750
gtin 8720039153592
Filament properties
Weight filament 750 g

The base material used in the filament. For more information on the different materials, please check the Filament information page

Color White
Color (on label) White
Diameter 2.85 mm
Diameter tolerance 0.1 mm
Printing properties
Temperature - extruder 190-200 °C
Temperature - heated bed 0 °C
Price breaks
1 - 9: excl $ 43
10 - 29: excl $ 40.75
30 - : excl $ 38.50
Need a larger quantity? Contact our Sales department.

Related productsRelated products

Discover products that go hand in hand with the allPHA White filament - 2.85 mm / 750 g. These are products that have been purchased the most with the allPHA White filament - 2.85 mm / 750 g. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.

KWB Sanding Paper K180 (Fine) Roll of 93 mm x 5m
Roll of general purpose K180 (Fine) sanding paper to sand your 3D prints
  $ 4.40
Spatula tool|80 mm
Sturdy stainless steel cleaning spatula for easy removal of 3D prints
  $ 4.40
Hygrometer with thermometer
Measure your water vapor percentage in the air with this hygrometer
  $ 5.70

Copyright 2009 - 2023 | ReprapWorld