ColorFabb ASA and ASA Low weight 3D filament

Explore the ASA 3D filament by ColorFabb. ASA is a weather proof material being quite resilient against UV light and rain, while LW-ASA also enables you to reduce the weight of your objects.

ASA filament|Black 1.75 mm / 0.65 kg
Premium ASA filament with exceptional temperature and UV-light resistance
  • Combination of PLA/PHA
  • Relatively easy to print
  • Phenomenal UV light resistance
  • Creates weather-resistant parts
 
$ 22.75
In stock
ASA filament|Black 2.85 mm / 0.65 kg
Premium ASA filament with exceptional temperature and UV-light resistance
  • Combination of PLA/PHA
  • Relatively easy to print
  • Phenomenal UV light resistance
  • Creates weather-resistant parts
 
$ 22.75
In stock
ASA filament|Neutral 1.75 mm / 0.65 kg
Premium ASA filament with exceptional temperature and UV-light resistance
  • Combination of PLA/PHA
  • Relatively easy to print
  • Phenomenal UV light resistance
  • Creates weather-resistant parts
 
$ 22.75
In stock
ASA filament|Neutral 2.85 mm / 0.65 kg
Premium ASA filament with exceptional temperature and UV-light resistance
  • Combination of PLA/PHA
  • Relatively easy to print
  • Phenomenal UV light resistance
  • Creates weather-resistant parts
 
$ 22.75
In stock
LW-ASA filament|Black 1.75 mm / 0.65 kg
Lightweight ASA filament for unique applications
  • UV resistant
  • Blended layer lines
  • Extremely lightweight
  • Expands to 2x the volume
  • Withstands high temperatures
 
$ 40.75
In stock
LW-ASA filament|Black 2.85 mm / 0.65 kg
Lightweight ASA filament for unique applications
  • UV resistant
  • Blended layer lines
  • Extremely lightweight
  • Expands to 2x the volume
  • Withstands high temperatures
 
$ 40.75
In stock
LW-ASA filament|Neutral 1.75 mm / 0.65 kg
Lightweight ASA filament for unique applications
  • UV resistant
  • Blended layer lines
  • Extremely lightweight
  • Expands to 2x the volume
  • Withstands high temperatures
 
$ 40.75
In stock
LW-ASA filament|Neutral 2.85 mm / 0.65 kg
Lightweight ASA filament for unique applications
  • UV resistant
  • Blended layer lines
  • Extremely lightweight
  • Expands to 2x the volume
  • Withstands high temperatures
 
$ 40.75
In stock
LW-ASA filament
LW-ASA filament
ColorFabb
Lightweight ASA filament for unique applications
  • UV resistant
  • Blended layer lines
  • Extremely lightweight
  • Expands to 2x the volume
  • Withstands high temperatures
From $ 40.75
4 types available

About ColorFabb ASA filament

ASA filament by ColorFabb is a material for more advantaged 3D printer users as the material prints more like ABS, while warping and shrinking is more manageable. The material has two key selling points: its inherent UV stability and high temperature resistance of 96 °C. This results in a well suited material for outdoors.

ASA is more susceptible to warping compared to PLA or PETG type filaments. Especially models with a large footprint can shrink and warp during printing, but compared to ABS in most cases less severe.

Apart from using a large brim and heated buildplate of 90-100°C (or higher if your machine is capable) we can also advice the following. Print a tall skirt around your model to reduce cold air flow around the printed model or print inside an enclosure for better control of the environment temperature.

 

What is ColorFabb LW-ASA filament?

Compared to the ColorFabb ASA the LW-ASA 3D filament has comparable features. However, the ColorFabb LW-ASA material is capable of increasing its volume nearly 2.5 times. The filament density is close to 1,07 g/cm3, but when foamed at its maximum capacity users will achieve part density close to 0.43 g/cm3. The foaming process consists of printing at higher temperature, caising the filament to foam and increase in volume. 

LW-ASA is more susceptible to warping compared to PLA or PETG type filaments. Models with a large footprint can shrink and warp during printing, albeit compared to ABS in most cases less severe.

Apart from using a large brim and heated buildplate of 90-100C (or higher if your machine is capable) we can also advice to print a tall skirt around your model to reduce cold air flow around the printed model or even better: print inside an enclosure for better control of the environment temperature.

 

Why ReprapWorld?
  • Orders dispatched same business day
  • 3.000+ products in our assortment
  • More than 45.000 satisfied customers in over 40 countries
  • Secure payment for all payment options
  • Professional tech support (over 10 years 3D experience)
Pay safely using


home
Copyright 2009 - 2023 | ReprapWorld