Discover 3D printing with the LW/ASA filament by colorFabb. This is a filament material designed using foam technology, expanding 2.5 times the volume. Create durable printed items that are UV resistant and can handle high temperatures.
The colorFabb LW/ASA filament material is perfect for creating RC planes, cosplay items, and props that need to be kept outdoors for long periods of time. Since the filament can increase its volume to nearly 2 and half times, its density is around 1.07 g/cm3. When the material is foamed at its highest capacity, you will be able to get a part density of approximately 0.43 g/cm3. Furthermore, when the material is foamed at 240°C, the surface will become a nice matte color.
Successfully print the LW/ASA filament successfully at 240°C-260°C with a heated bed temperature set at 90°C-110°C. This material can also have a tendency to warp, however significantly less in comparison to ABS filament. Printing with an enclosure will help keep temperatures even for consistent layers. Due to its shrinkage, we advise that you use a strong adhesive on the bed. It is also a good idea to print with a brim to ensure high 3D model quality.
Please take into account that the color may deviate.
|Weight filament||650 g|
The base material used in the filament. For more information on the different materials, please check the Filament information page
|Diameter tolerance||0.1 mm|
|Temperature - extruder||240-260 °C|
|Temperature - heated bed||90-100 °C|
|Vicat Softening Temperature||96 °C|
|Outer diameter||200 mm|
|Inner diameter||52 mm|
|1 - 9:||excl $ 41.50|
|10 - 29:||excl $ 39.50|
|30 - :||excl $ 37.50|
|Need a larger quantity? Contact our Sales department.|
Discover products that go hand in hand with the LW-ASA filament - Black 2.85 mm / 0.65 kg. These are products that have been purchased the most with the LW-ASA filament - Black 2.85 mm / 0.65 kg. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.