PLA/PHA filament
Signal Yellow 2.85 mm / 0.75 kg

Unique PLA blend specially designed by colorFabb for strong and reliable PLA parts
$ 19.50  excl VAT
Only 6 left, order now!
Stock - NL: 6
Others also bought:
Adhesion spray 400ml|ABS, PLA and PETG
Adhesion spray 400ml
Your best defense against warping and prints loosening from the bed
$ 9.10
Plus Adhesion spray 100ml|ABS, PLA and PETG
Plus Adhesion spray 100ml
Your best defense against warping and prints loosening from the bed
$ 6.90
Filament cutter tool
Filament cutter tool
Cut filament and electrical wire easily with this very sharp cutter
$ 4.50
Modifi3d repair and modification tool
Modifi3d repair and modification tool
Clean, repair and modify your 3D prints using this user-friendly tool
$ 32

Product description

Explore colorFabb’s PLA/PHA filament. This material is extremely easy to work with and provides a warp-free 3D printing experience. The filament material consists of a unique blend consisting of PHA particles that adds toughness so that you can print long-lasting parts.

The PLA/PHA filament is the perfect material for investment casting and prototyping. Unlike standard PLA material, this blend is less brittle so that you can create sturdy and durable parts. Thanks to the focus on pigmentation, your printed parts will have a beautiful and vibrant finish.

Create stunning prototypes and models at an extruder temperature of 195°C-220°C. If you would like to use a heated bed, keep it between 50°C-60°C. For a cold bed, masking tape is the best adhesive choice. In case you are using a glass or aluminum print surface, colorFabb advises using a glue stick. The recommended print speed is 40-100 mm/s.

  • Reliable
  • Low-warp
  • Ease-of-use
  • Vibrant colors
  • Biodegradable


gtin 8719033551114
Filament properties
Weight filament 750 g

The base material used in the filament. For more information on the different materials, please check the Filament information page

Variant PLA/PHA
Color Yellow
Color (on label) Signal Yellow
Diameter 2.85 mm
Diameter tolerance 0.05 mm
Printing properties
Temperature - extruder 195-220 °C
Temperature - heated bed 50-60 °C
Material Properties
Glass Transition Temperature 55 °C
Spool dimensions
Outer diameter 200 mm
Inner diameter 52 mm
Width 55 mm
Price breaks
1 - 9: excl $ 19.50
10 - 29: excl $ 18.50
30 - : excl $ 17.50
Need a larger quantity? Contact our Sales department.

Related productsRelated products

Discover products that go hand in hand with the PLA/PHA filament - Signal Yellow 2.85 mm / 0.75 kg. These are products that have been purchased the most with the PLA/PHA filament - Signal Yellow 2.85 mm / 0.75 kg. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.

KWB Sanding Paper K180 (Fine) Roll of 93 mm x 5m
Roll of general purpose K180 (Fine) sanding paper to sand your 3D prints
  $ 4.50
Spatula tool|80 mm
Sturdy stainless steel cleaning spatula for easy removal of 3D prints
  $ 4.50
Hygrometer with thermometer
Measure your water vapor percentage in the air with this hygrometer
  $ 5.90

Copyright 2009 - 2023 | ReprapWorld