CopperFill filament
Copper 1.75 mm / 1.5 kg

Create aesthetically pleasing 3D prints with a finished shiny copper look
$ 71.50  excl VAT
Only 6 left, order now!
Stock - NL: 6
Others also bought:
Adhesion spray 400ml|ABS, PLA and PETG
Adhesion spray 400ml
Your best defense against warping and prints loosening from the bed
$ 8.80
Plus Adhesion spray 100ml|ABS, PLA and PETG
Plus Adhesion spray 100ml
Your best defense against warping and prints loosening from the bed
$ 6.60
Filament cutter tool
Filament cutter tool
Cut filament and electrical wire easily with this very sharp cutter
$ 4.30
Modifi3d repair and modification tool
Modifi3d repair and modification tool
Clean, repair and modify your 3D prints using this user-friendly tool
$ 30.75

Product description

The colorFabb Copperfill filament is a PLA/PHA-based 3D filament infused with copper particles. This unique filament requires some 3D printing experience and can easily be printed with FDM/FFF 3D printer. Polish and sand your 3D print for the final dazzling copper appearance.

Experience 3D printing with this special metallic filament by colorFabb. Objects printed with Copperfill filament will be 3-4 times heavier than the weight of normal PLA 3D parts. Use this filament to create unique parts like jewelry and stunning prototypes. The material produces high-quality prints without warping and prints as easily as PLA filament.

Print Copperfill filament at an extruder temperature between 190°C-210°C with a heated bed temperature of 50°C-60°C. Using a heated bed is not mandatory. Using blue painter’s tape will ensure proper adhesion when printing without a heated bed. The recommended print speed is 40-100 mm/sec. A hardened steel nozzle or ruby tip nozzle is essential to use when printing Copperfill filament to avoid degradation and wear of your 3D printer’s components. Please store your 3D filament in an airtight bag and in a dark area for maximum longevity.

  • Heavyweight parts
  • Superb visual quality
  • Sanding and polishing options
  • Does not require a heated bed


sku CFCFC175MM1500
gtin 8719033555181
Filament properties
Weight filament 1500 g

The base material used in the filament. For more information on the different materials, please check the Filament information page

Variant CopperFill
Color Brown
Color (on label) Copper
Diameter 1.75 mm
Diameter tolerance 0.05 mm
Printing properties
Temperature - extruder 195-220 °C
Temperature - heated bed 50-60 °C
Price breaks
1 - 9: excl $ 71.50
10 - 29: excl $ 67.75
30 - : excl $ 64.50
Need a larger quantity? Contact our Sales department.

Related productsRelated products

Discover products that go hand in hand with the CopperFill filament - Copper 1.75 mm / 1.5 kg. These are products that have been purchased the most with the CopperFill filament - Copper 1.75 mm / 1.5 kg. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.

KWB Sanding Paper K180 (Fine) Roll of 93 mm x 5m
Roll of general purpose K180 (Fine) sanding paper to sand your 3D prints
  $ 4.40
Spatula tool|80 mm
Sturdy stainless steel cleaning spatula for easy removal of 3D prints
  $ 4.40
Hygrometer with thermometer
Measure your water vapor percentage in the air with this hygrometer
  $ 5.70

Copyright 2009 - 2023 | ReprapWorld