3D print premium supports with the Polymaker’s PolyDissolve S1 filament. The PolyDissolve S1 is a water-soluble filament material developed to provide phenomenal support for your 3D models with more complex designs. This is the ideal support filament to use when printing the following filament materials: PLA, TPU, PVB, and Nylon.
The PolyDissolve S1 belongs to the remarkable support filament line material by Polymaker. It has been manufactured to bond incredibly well with a range of popular filament materials. With this support material, you will be able to widen your scope of 3D printing and create more sophisticated 3D prints than before. This is perfect for those 3D models with overhangs and bridging!
Create prototypes and masterpieces at a nozzle temperature of 215°C-225°C. Set your heated bed between 25°C-60°C. The advised printing speed is 30-40 mm/s. The PolyDissolve S1 is known to thrive and perform best when using a glass bed in combination with a thin layer of adhesive glue stick.
Once your 3D model has cooled down, it is time to remove the support structure. This material can be partially broken off by hand, or by simply using pliers. Next, the model should be placed in warm water. Thanks to the water-soluble qualities, the remaining supports will smoothly detach themselves from your model
For the best results, keep your PolyDissolve filament in the best condition for 3D printing. Since the material is highly sensitive to moisture, we advise using the handy PolyBox II. Not only will your filament be protected from water particles, but the smart device will also automatically feed the material directly to your machine!
General properties | |
---|---|
sku | PMPDS1N750MM175 |
gtin | 6938936701811 |
mpn | PM70181 |
Material | PolyDissolve S1 |
Series | PolyDissolve |
Filament properties | |
Weight filament | 750 g |
Material The base material used in the filament. For more information on the different materials, please check the Filament information page |
S1 |
Color | Neutral |
Diameter | 1.75 mm |
Printing properties | |
Temperature - extruder | 215-225 °C |
Temperature - heated bed | 25-60 °C |
Spool dimensions | |
Outer diameter | 200 mm |
Inner diameter | 55 mm |
Width | 45 mm |
1 - 9: | excl $ 64.50 |
10 - 29: | excl $ 61.50 |
30 - : | excl $ 58 |
Need a larger quantity? Contact our Sales department. |
Discover products that go hand in hand with the PolyDissolve S1 filament - Neutral 1.75 mm / 0.75 kg. These are products that have been purchased the most with the PolyDissolve S1 filament - Neutral 1.75 mm / 0.75 kg. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.