Make your own filament! High quality pellets specifically for 3D printing. Note that you need to dry these for actual use.
Polylactic acid or polylactide called PLA is a thermoplastic aliphatic polyester made of renewable resources like corn or starch. PLA has a relative low melting temperature, 175°C, and is a very hard material. You can use it for the most common prints and is easy to print with.
You only can print with the right temperature settings. The temperature setting can be different on your type of extruder. This is depending on the heat transfer from the extruder to the filament so you can use this as guideline but please adjust it to your own extruder.
Melting temperature: 175 °C
Nozzle temperature: 190°C - 220°C
Heated bed temperature: 30°C
|Weight filament||1000 g|
The base material used in the filament. For more information on the different materials, please check the Filament information page
|1 - 9:||excl $ 14.75|
|10 - 24:||excl $ 13.50|
|25 - 49:||excl $ 12.50|
|50 - :||excl $ 12.50|
|Need a larger quantity? Contact our Sales department.|