Easily assembled 3D printer, with large 30x30cm heated build surface. The ET5 PRO enables you to create 3D prints with only about 10 minutes of assembly. Due to stable frame design, higher prints speeds are possible up to 150mm/s. The automatic bed leveling function and intuitive 3.5" LCD screen interface makes pre-print setup easy, while the filament detection sensor and power failure protection prevent disaster. Compared to the ET5, the PRO version includes a high quality Meanwell power supply, the very silent TMC stepper drivers and protection against overheating of the nozzle.
The Anet ET5 is a quick-assembly printer made from a combination of aluminum extrusions, aluminum chassis and a high quality brushed aluminum x-gantry. No more fiddling around with small nuts and bolts, this printer assembles in minutes!
In addition, the printer has "power resume" capability (in case of power cut). Popular slic3ing software like Slic3r, Cura and Simplify 3D will work with this printer and software and documentation is provided on the USB stick
|3D printer properties|
|Nozzle diameter||0.4 mm|
|Filament diameter||1.75 mm|
|Hot-end type||MK8 Compatible|
|Number of extruders||1|
|Max. hot-end temperature||250 °C|
|Max. heated bed. temp.||100 °C|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.
|Type of 3D printer||FDM/FFF|
|Product Dimensions||520x540x600 mm|
|Type of control interface||Touch screen|
|Display type||3.5" LCD Screen|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
Auto Bed Leveling
The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.
Detect if you have run out of filament or that the filament is broken.
This machine has an enclosure to protect the print or product from outside influences.
|Input voltage||110/240 V|
|Operating voltage||24 V|
Find useful replacement parts and components for the ET5 PRO 3D Printer. Ensure smooth operation and keep your ET5 PRO 3D Printer in the best condition with our series of spare parts. Easily order spare parts for replacement or to store in your inventory.
Discover all the parts and accessories that you can use with the ET5 PRO 3D Printer. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.