Produce large 3D prints in great detail with the Anycubic Photon M3 Max resin 3D printer! This big resin 3D printer is easy to use a an impressive 7K 6480x3600 pixels resolution monochrome LCD for the finest details on your 3D prints. The 3D printer uses a 405nm UV lights source and can be used with a variety of 3D resins, while the 450:1 contrast ratio make even the smallest parts cured in excellent detail.
With only limited assembly required you can start 3D printing in minutes. Only the build platform and FEP sheet needs to be installed before you can start using the machine. Printable files can be created using the included powerful slicing software, just save them to the included USB stick and select the file using the intuitive user-interface on the 4.3" touch screen.
The aluminum alloy build plate has been laser engraved for optimal adhesion, while the 30.0 x 29.8 x 16.4 cm build volume allow you to make a myriad of models into reality. The 120W maximum power consumption saves a lot of energy, reducing the costs of operation dramatically compared to FDM type 3D printers.
|3D printer properties|
The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.
|Type of 3D printer||SLA/DLP|
For most entry-level, smaller 3D printers this is a single threaded rod. For bigger machines the Z-axis moves with two rods, while 3D printers with a bed plate that moves in the Z-axis typically have three or four rods to move.
Bed movement direction
The direction the buildplate moves. Most printers move the build plate in the Y-axis direction. This is a simpler design, but gives problems at greater build height, because the inertia of the mass of the buildplate + 3D print impact the quality of the layers, requiring you to limit the speed. Other printers move in the Z-axis, allowing you to print faster without trading quality of the layer build-up.
|Product Dimensions||596x400x408 mm|
|UV Wavelength||405 nm|
|LCD Display technology||Monochrome LCD|
Size of the diagonal of the display in inch.
Number of pixels (points) of the display in the length and width
Resin LCD type
Type is display used to emit UV light
|7K Monochrome LCD|
|Display type||4.3" Screen|
|Type of control interface||Touch screen|
|Max. Power rating||120 W|
Discover products that go hand in hand with the Photon M3 Max. These are products that have been purchased the most with the Photon M3 Max. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.
Discover all the parts and accessories that you can use with the Photon M3 Max. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.
Find compatible resin for your 3D printer