Titan direct-drive powered, silent 3D printer with 30x30cm build surface
Above average heated bed suitable for large prints and easy to assemble 3D printer
The CR-10S pro comes with full color LCD, heated bed and SD-card. Requires only a few minutes of basic assembly. No hardware experience required!
Black 1.75 mm / 1 kg
2 Meters / USB 2.0
0.40 mm / 1.75 mm
1.75mm / 1 kg / 4 colors
Product description
The new impressive 3D printer in the Creality CR10 series! This version adds a stabilization support kit, improving the stability of the frame dramatically, for the best quality prints. With its build volume of 450X450X470mm it is an impressive machine!
This 3D printer has the reliability you are used of the Creality brand and improves upon the CR10 series with the lastest and greatest of the 3D printer market. As opposed to other printers in the CRF10 line, the printer has a heated bed that uses the full surface to heat with its powerful 24V heater, powered by a separate power supply for the best performance and fastest heating possible.Due to the dual timing belts the bed is more stable than most printers of this size and moves smoothly back and forth.
As with all new models in the Creallity series this printer has a BL Touch for easy automatic bed leveling. After a first calibration, there is no longer the need to fiddle with the bed position before starting a print. A big advantage of the BL Touch is that it retracts after calibration and is out of the way while printing.
For the best reliability the latest improvements of 3D printing are included, including a filament detection sensor to avoid filament run-out while printing. If the filament runs out, the 3D printer is paused. No more failed prints due to empty filament spools! The resume function enables you to continue printing after a filament run-out or power failure while printing from SD. This printer uses the best material available for 3D printers for the extruder system. The PTFE tubing is replaced by official Capricorn tubing for the best throughput of filament and it can withstand higher temperatures much better. And with the dual filament driving gear by Bondtech, the grip on the filament is extraordinary, resulting in the highest and most reliable filament extrusion!
The printer supports printing from SD card (also included) and can be controlled with its easy to use HD LCD interface, so you don't need to have your computer connected while printing.
Included with the CR10 Max 3D printer is:
- Bed scraper
- Spare nozzle (0.4 and 0.8mm)
- Spare pneufit coupling
- Micro SD card + USB adapter
- Calibration cube for the Z-axis
- Power cable
- USB cable
- 1kg of PLA
- Tie-wraps
- Build volume: 450X450X470mm
- Heated bed: Yes
- LCD+SD card: Yes
- Materials: PLA, PETG
- Filament diameter: 1.75mm
- Auto bed leveling: Yes
Specifications
| General properties | |
|---|---|
| sku | CR10SMAX |
| gtin | 7436956682671 |
| mpn | 1001010030 |
| Series | CR |
| Type | CR-10 Max |
| Nozzle properties | |
| Nozzle diameter | 0.4 mm |
| Hot-end type | Creality Hotend |
| Max. hot-end temperature | 250 °C |
| Nozzle type | M6x0.75mm |
| 3D printer properties | |
|
Buildvolume The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed. |
45x45x47 cm |
| Printer Geometry | Cartesian |
| Layer resolution | 0.1 mm |
| Filament types | PLA,PETG |
| Max. heated bed. temp. | 100 °C |
| Type of 3D printer | FDM/FFF |
|
Bed movement direction The direction the buildplate moves. Most printers move the build plate in the Y-axis direction. This is a simpler design, but gives problems at greater build height, because the inertia of the mass of the buildplate + 3D print impact the quality of the layers, requiring you to limit the speed. Other printers move in the Z-axis, allowing you to print faster without trading quality of the layer build-up. |
Y-axis |
| Dimensions | |
| Product Dimensions | 650x785x735 mm |
|
Compatible diameter filament This product is compatible with the specified filament diameter. |
1.75 mm |
| Features | |
| Display type | Full color LCD |
| Type of control interface | Touch screen |
|
SD-card A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer. |
|
|
Heated bed A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed. |
|
|
Auto Bed Leveling The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position. |
|
|
Filament sensor Detect if you have run out of filament or that the filament is broken. |
Switch type |
| Electrical specifications | |
| Input voltage | 110/240 V |
| Operating voltage | 24 V |
| Extruder properties | |
| Number of extruders | 1 |
| Filament diameter | 1.75 mm |
|
Extruder type Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here |
Bowden |
AlternativesAlternatives
Looking for a comparable product to the CR-10 Max? Explore our selection of similar alternatives in place so that you always have a variety of options for any project. Feel free to reach out to us for advice on the alternatives.
Spare PartsSpare Parts
Find useful replacement parts and components for the CR-10 Max. Ensure smooth operation and keep your CR-10 Max in the best condition with our series of spare parts. Easily order spare parts for replacement or to store in your inventory.
Extruder parts
SuppliesSupplies
Discover all the parts and accessories that you can use with the CR-10 Max. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.
Filament
Buildplate Adhesives
Lubrication and maintenance
UpgradesUpgrades
Boost your CR-10 Max with the necessary upgrades for top performance. Find all the necessary peripherals and components here for a heightened work process. Successfully increase your productivity and assure the highest level of quality!
Extruder parts
