Black 1.75 mm / 1 kg
1.75 mm / 0.40 mm
1.75mm / 1 kg / 4 colors
ABS, PLA and PETG
Product description
Meet the FLSun V400 high-speed Delta 3D printer with a big build volume of 410mm x 300Ø that can reach speeds up too 400mm/s to finish 3D prints in no-time. The direct drive system is lightweight and has a powerful dual gear to maximize grip onto the filament and also allowing you to print flexible materials.
Using the FLSun V400 is very easy thanks to it' s intuitive user-interface and the auto bed leveling sensor in combination with a fixed printbed makes sure that you can print reliably. The 3D printer allows you to control the 3D printer remotely using a WIFI network connection, and files can be send to the machine over network as well.
The printer comes with a E3D and bi-metal heatbreak for the best extrusion performance. Check out the assortment of for a hardened steel nozzle to print abrasive materials or select a bigger output size for even faster 3D printing.
Thanks to the Delta design print quality is not affected by moving print beds or inertia of heavy axis, even at higher printlayers. This ensures consistent quality throughout the process without slowing down the 3D printer.
The hotend can reach temperature up to 300 degrees, while the printbed allows temperatures up to 110 °C for a myriad of materials including and .
- 400mm/s print moves
- 300Ø Build surface
- Klipper firmware
- PEI build platform
- Up to 300°C
Specifications
| General properties | |
|---|---|
| sku | FLSUNV400 |
| gtin | 0717981620133 |
| Color | Black |
| Type | v400 |
| Max. temperature | 300 °C |
| Nozzle properties | |
| Nozzle diameter | 0.4 mm |
| Hot-end type | E3D Volcano |
| Max. hot-end temperature | 300 °C |
| Nozzle type | E3D Volcano |
| 3D printer properties | |
| Bed Diameter | 30 cm |
| Printer Geometry | Delta |
| Layer resolution | 0.05 mm |
|
Max. printing speed Maximum speed for printing moves of the machine, so while extruding filament. |
400 mm/s |
| Filament types | Flexibles,PETG,PLA |
| Max. heated bed. temp. | 110 °C |
| Type of 3D printer | FDM/FFF |
|
Z-axis support For most entry-level, smaller 3D printers this is a single threaded rod. For bigger machines the Z-axis moves with two rods, while 3D printers with a bed plate that moves in the Z-axis typically have three or four rods to move. |
Three rods |
|
Bed movement direction The direction the buildplate moves. Most printers move the build plate in the Y-axis direction. This is a simpler design, but gives problems at greater build height, because the inertia of the mass of the buildplate + 3D print impact the quality of the layers, requiring you to limit the speed. Other printers move in the Z-axis, allowing you to print faster without trading quality of the layer build-up. |
Not moving |
| Dimensions | |
|
Compatible diameter filament This product is compatible with the specified filament diameter. |
1.75 mm |
| Features | |
| Display type | 7" Screen |
| Type of control interface | Touch screen |
|
SD-card A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer. |
|
| USB | |
|
Heated bed A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed. |
|
|
Auto Bed Leveling The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position. |
|
|
WIFI This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print. |
|
|
Filament sensor Detect if you have run out of filament or that the filament is broken. |
Switch type |
| Electrical specifications | |
| Input voltage | 115/230 V |
| Operating voltage | 24 V |
| Max. Power rating | 450 W |
| Plug type | EU Plug |
| Extruder properties | |
| Number of extruders | 1 |
| Filament diameter | 1.75 mm |
| Cold-end type | Dual-gear |
|
Extruder type Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here |
Direct-drive |
Spare PartsSpare Parts
Find useful replacement parts and components for the V400. Ensure smooth operation and keep your V400 in the best condition with our series of spare parts. Easily order spare parts for replacement or to store in your inventory.
Extruder parts
SuppliesSupplies
Discover all the parts and accessories that you can use with the V400. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.
Filament
Buildplate Adhesives
Lubrication and maintenance
UpgradesUpgrades
Boost your V400 with the necessary upgrades for top performance. Find all the necessary peripherals and components here for a heightened work process. Successfully increase your productivity and assure the highest level of quality!
Extruder parts
