Discover industrial-grade 3D printing with the Flashforge Guider IIs High temperature 3D printer. This is a 3D printer designed for high productivity 3D printing with remote ontrol over ethernet and wifi. Easily operate the 3D printer with the user-friendly touch screen display and intuitive FlashPrint software. Compared to the Guider II the IIs adds a build-in camera, high-temperature hotend and HEPA filter.
Achieve a high volume of 3D prints per session with the Flashforge Guider IIs. This is a 3D printer for experienced makers who are interested in creating parts at an industrial level thanks to the massive build space of 280 mm x 250 mm x 300 mm. With so much space, productivity is heightened and the 3D printer makes a great solution for small production. The auto-bed leveling feature cuts down time by making sure that the 3D printer’s platform has been accurately leveled beforehand.
The handy resume print function means that your printing progress will not be lost in case of a power outage. The Flashforge Guider IIs will pick the 3D printing from where it left off previously. This will effectively reduce print failures and therefore reduce waste while saving a lot of time. With an open filament system, you can print a variety of materials up to the maximum extruder temperature of 300°C.
WIth the Flashforge Guider IIs bed leveling is done in seconds thanks to the auto bed-leveling. The 3D printer comes with a switch type sensor that is extenden upon probing the bed and accurately measures the tiniest imperfections in the build plate.
The Guider IIs includes a HEPA filter with active fan to filter potential toxic particles and fumes for a better working environment. Also the 3D printer can resume a 3D printer after power-loss.
|Nozzle diameter||0.4 mm|
|Max. hot-end temperature||300 °C|
|3D printer properties|
The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.
|Layer resolution||0.1 mm|
Max. printing speed
Maximum speed for printing moves of the machine, so while extruding filament.
|Max. heated bed. temp.||120 °C|
|Type of 3D printer||FDM/FFF|
For most entry-level, smaller 3D printers this is a single threaded rod. For bigger machines the Z-axis moves with two rods, while 3D printers with a bed plate that moves in the Z-axis typically have three or four rods to move.
Bed movement direction
The direction the buildplate moves. Most printers move the build plate in the Y-axis direction. This is a simpler design, but gives problems at greater build height, because the inertia of the mass of the buildplate + 3D print impact the quality of the layers, requiring you to limit the speed. Other printers move in the Z-axis, allowing you to print faster without trading quality of the layer build-up.
|Product Dimensions||550x490x750 mm|
Compatible diameter filament
This product is compatible with the specified filament diameter.
|Display type||Full color LCD|
|Type of control interface||Touch screen|
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
Auto Bed Leveling
The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.
|Air filtration system||HEPA filter|
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.
Detect if you have run out of filament or that the filament is broken.
This machine has an enclosure to protect the print or product from outside influences.
Bed level sensor
Type of bed leveling sensor to do the bed leveling procedure.
|Input voltage||110/240 V|
|Operating voltage||24 V|
|Max. Power rating||500 W|
|Number of extruders||1|
|Filament diameter||1.75 mm|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
Find useful replacement parts and components for the Guider IIs. Ensure smooth operation and keep your Guider IIs in the best condition with our series of spare parts. Easily order spare parts for replacement or to store in your inventory.
Discover all the parts and accessories that you can use with the Guider IIs. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.
Boost your Guider IIs with the necessary upgrades for top performance. Find all the necessary peripherals and components here for a heightened work process. Successfully increase your productivity and assure the highest level of quality!