Check out the K1 printer from Creality 3D now.
The K1 is assembled and calibrated before shipment. Just start printing the moment your K1 arrives.
This printer is 12 times faster than a regular FDM 3D printer. A fast speed cuts printing time and raises efficiency.It uses less energy for the same output, thus more eco-friendly.
The new ceramic heater, encircling the entire hotend. It heats to 200℃ in 40s and melts the filament instantly. Dual-gear direct extruder, delivering 50N strong extrusion force.
A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too. The model hardens before any stringing and warping could happen.
It allows support-free bridges and overhangs.
|Nozzle diameter||0.4 mm|
|Max. hot-end temperature||300 °C|
|3D printer properties|
The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.
Max. printing speed
Maximum speed for printing moves of the machine, so while extruding filament.
|Max. heated bed. temp.||100 °C|
|Type of 3D printer||FDM/FFF|
|Display type||4.3" Color LCD|
|Type of control interface||Touch screen|
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
Auto Bed Leveling
The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
Detect if you have run out of filament or that the filament is broken.
This machine has an enclosure to protect the print or product from outside influences.
Bed level sensor
Type of bed leveling sensor to do the bed leveling procedure.
|Input voltage||100/240 V|
|Max. Power rating||350 W|
|Filament diameter||1.75 mm|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
Discover all the parts and accessories that you can use with the K1. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.