With this Anycubic SLA 3D printer you can make resin 3D prints with a maximum of 13x7.8x16 cm at great speed: it can go up to a speed of 80 mm per hour. It is 2-3 times faster than a regular LCD screen, because of the new Matrix parallel light source which results in a uniform exposure, higher efficiency and a better heat dissipation. The high performance Z-axis is extremely stable thanks to the dual linear rails and improved mounting, while you can setup and level the 3D printer in minutes thanks to the easy bed leveling system.
You can design your models with the updated user-friendly Anycubic Slicer software, which now enables you to add text and has the ability to split your model. You can also download the Anycubic app that allows you to adjust printer settings, remotely control the printer and monitor the progress from your phone.
The following items are included in the box:
|Bed width||13 cm|
|Bed Depth||7.8 cm|
|Build Height||16 cm|
|Resolution X axis||0.051 mm|
|Resolution Y axis||0.051 mm|
|Layer resolution||0.01-0.15 mm|
|Print speed (Z-axis)||80 mm/h|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
Auto Bed Leveling
The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.
|Max. Power rating||55 W|
|Laser engraving properties|
Photon Mono SE|SLA 3D Printer related products to keep you running.