Ultrabase Silicon Carbon coated glass build surface upgrade for Ender3 (pro), CR-20 (Pro) and ender5. Gives a great adhesive for all the major plastics: PLA, PETG an ABS
This official Creality Ultrabase coated heated bed plate is potentially the last heater bed upgrade you'll ever need for the CR 10S Pro. The hight quality Silicon Carbon coating can handle temperatures up to 120 deg C, and is one of the few materials that works with all primary thermoplastics: PLA, PETG and ABS.
Since adhesion is so univerally strong, don't oversquash your first layer. Wear and tear is reduced when allowing the bed to cool down to under 40 deg (or 50 for ABS) before print removal. The optimal z-height will allow prints to pop off once the bed has cooled.
When using the Creality Ultrabase there is no additional adhesives required, but 3Dlac is recommended. Because of the honeycombed carbon layer your print will automatically stick very well. When the print is finished give it about 15 minutes to cool down up to room temperature and the print will pop-off the bed it self. Before printing please level the bed to ensure no damage is going to get caused to the carbon layer.
|1 - 4:||excl $ 23|
|5 - 9:||excl $ 21.75|
|10 - 29:||excl $ 21.50|
|30 - :||excl $ 20.75|
|Need a larger quantity? Contact our Sales department.|
Discover all the parts and accessories that you can use with the Ultrabase carbon build plate - 235x235x4mm. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.