ReprapWorld
NEMA23 Stepper motor / 1.8° step / 30.59 kg.cm
General purpose NEMA23 stepper motor with 30cm wires without connector attached.
$ 49
excl VAT
Dispatches same business day!
Product description
General purpose NEMA23 stepper motor with 30cm wires without connector attached.
You can use the 4-wire cable and some heatshrink to extend the leads. Black-green and red-blue are the pairs for the two coils.
Specifications
| General properties | |
|---|---|
| sku | SMNM23S18KG31 |
| gtin | 8719345005800 |
| Shaft type | Flat |
| Holding torque | 30.59 kg.cm |
| Stepping angle | 1.8 ° |
| Nr. of leads | 4 |
| Leads length | 30 cm |
| Weight | 1200 g |
| Dimensions | |
| Width | 56.4 mm |
| Height | 56.4 mm |
| Depth | 80 mm |
| Shaft diameter | 8 mm |
| Shaft length | 30.6 mm |
| Mounting hole size | 5 mm |
| Electrical specifications | |
| Connector | |
| Current rating | 4.0 A |
| Wire Thickness | 22 AWG |
| Voltage rating | 3.0 V |
| Inductance | 5.04 mH |
Price breaks
| 1 - 4: | excl $ 49 |
| 5 - 9: | excl $ 46.50 |
| 10 - 59: | excl $ 45.50 |
| 60 - : | excl $ 44 |
| Need a larger quantity? Contact our Sales department. | |
Related productsRelated products
Discover products that go hand in hand with the NEMA23 Stepper motor / 1.8° step / 30.59 kg.cm. These are products that have been purchased the most with the NEMA23 Stepper motor / 1.8° step / 30.59 kg.cm. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.
Strong steel mounting plate for easy mounting of a NEMA17 stepper motor to your 3D printer frame.
$ 6.60
