Compact, affordable, single-board solution with on-board stepper drivers. 32-bit SAMD21 Microprocessor running at 40Mhz, well capable of running even Delta printers at decend speeds.
Minitronics is the slim but powerful electronics line. It's designed to be an easy to use, compact and smart solution to fit 90% of the 3D-printers. Unlike the Megatronics, which targets at the advanced range of usages, the Minitronics is plug and play, which will fit the needs of the average user better.
Minitronics has a powerful SAMD21J18 32-bit microprocessor with 256KB memory, running at 48Mhz. The board can be connected to a PC using a normal USB cable and can run stand-alone from 12V power supply. The board is compatible with Arduino and will therefor be easily programmed from the Arduino IDE.
The board comes with four DRV8825 on-board stepper drivers, which can be configured to different micro-stepping settings. To enable dual-head support an external stepper driver may be hooked up to the EXTSTEP header.
Version 2.0 of the Minitronics gives you more features, while maintaining the same small form-factor of the version 1.1. Mounting hole positions, USB connector and reset button are placed at the same positions making an upgrade easy.
The boards comes with a 40mm fan, to cool the back of the board, allowing the stepper drivers better performance. Also a power connector is provided, but you may wish to add wiring yourself
This is a kit of the following items.
|1x||Axial Fan 40x40x10mm ( 12 V )|
|1x||Minitronics v2.0 - 32-bit all-in-one controller board (board only)|
|External SD card|
|External stepper drivers||1|
|Seperated heated bed input|
|Product Dimensions||94x57x19 mm|
|1 - 9:||excl $ 44.50|
|10 - 29:||excl $ 42.50|
|30 - :||excl $ 40|
|Need a larger quantity? Contact our Sales department.|