The Ender 5 plus is a new Creality printer with a big print surface (350x350x400 mm), a heated bed that can warm, up to 110 degrees, auto bed leveling, touchscreen and a filament sensor.
With to the resume function, you can continue printing after, for example, power-loss. Popular software like Slic3r, Cura and Simplify 3D will work with this printer.
The printer kit includes all parts and tools to assemble the 3D printer. There is a sample of filament included, but to start printing we recommend a spool of filament.
The kit includes the following items:
|Bed width||35 cm|
|Bed Depth||35 cm|
|Build Height||40 cm|
|Resolution Z axis||0.1 mm|
|Number of extruders||1|
|Filament diameter||1.75 mm|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
|Max. heated bed. temp.||110 °C|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
|Auto Bed Leveling
The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.
This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.
This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.