Creality 3D

CR-10S pro

  • Build volume: 300x300x400mm
  • Heated bed: Yes
  • LCD+SD card: Yes
  • Materials: PLA, PETG
  • Filament diameter: 1.75mm
  • Auto bed leveling: Yes
SKU:CR10SPRO
GTIN:8719345011115
Stock: 151
$ 583.83  incl VAT In stock
Dispatches same business day!
Product Options
3D Printer Enclosure (large)|70x75x90 cm
Creality 3D
3D Printer Enclosure (large)
70x75x90 cm
Protects 3D prints against drafts and reduces smells
$ 109.51
Generic M6x.75   - Brass Nozzle|0.40 mm / 1.75 mm
ReprapWorld
Generic M6x.75 - Brass Nozzle
0.40 mm / 1.75 mm
Nozzle compatible with the CR-10S Pro (V2) and the CR-10S Max and other M6x.75 hotends
$ 7.87
USB A to Mini USB cable|2 Meters / USB 2.0
USB A to Mini USB cable
2 Meters / USB 2.0
Connect different electronics to your computer with this USB A to Mini USB 2.0 cable
$ 4.24
High-quality PLA filament|Black 1.75 mm / 1 kg
REAL Filament
High-quality PLA filament
Black 1.75 mm / 1 kg
Best choice PLA filament for the best results
$ 30.86

Product description

Creality's upgrade to the popular CR-10S 3D Printer. Comes with full color LCD, heated bed and SD-card. Requires only a few minutes of basic assembly. No hardware experience required!

The CR-10S Pro is packed with new features, including a fully improved and integrated filament runout detection system (so you never lose a print when your filament runs out), a dual-sided set of hobbed drive gears for extra filament grip, and upgraded hotend and more powerful radial fan for improved print cooling. This fan might be the loudest sound you hear, since the stepper drivers have been upgraded to the quiet TMC2208s using 256 microstep interpolation.

The design is clean, professional and portable given that the wiring, power supply and hi-res LCD panel are now integrated into the black brushed aluminum base enclosure. A high-accuracy capacitive sensor is installed within the toolhead compartment to assist with the manual bedplate leveling process and allows for 16 point mesh compensation (linearly interpolated). The heater bed now has a strong adhesive PEI-type surface for extra stick. Taken altogether: no more print warping or detachment!

 The CR-10S Pro kit is professionally packaged and contains only two logical sections (the horizontal and vertical frame) that can be assembled in minutes using only a few screws; the tools are included, and hardware experience is not required. Most of the frame is made from black aluminum V-slot extrusions and in combination with the bowden system for the extruder, results in an efficient, sturdy frame with 0.1mm Z-axis print precision. The dual sided lead screws on the Z-axis ensure good layer stacking and thus high quality prints.

For new 3D printing enthusiasts: 3D printers runs off of so-called "gcode" files, which are generated from free software slicers such as Slic3r or Cura. Most modern printers (including Crealitys) can run their gcode prints either via an integrated SD or mini-USB slot for stand-alone printing, or from a seperate PC or laptop via the USB slot. In case of power failure, Creality's printers have a "recovery" mode that allows for resuming the print from the LCD interface once power is restored, an essential sanity-saving feature to avoid the frustration of wasted time and filament.

A small "starter" spool of filament is included in the kit, but it won't last long! We recommend including in your purchase a larger spool of Real filament or a multi-color PLA sample pack to assist you in your upcoming exploration of all the colorful things you can print with your new Creality!

The kit includes the following items:

  • Power cable
  • USB cable
  • Spare pneufit coupling
  • Spatula
  • Filament cutter
  • USB-stick with SD card
  • Sample PLA for testing
  • Assembly tools

Specifications

Build volume
Bed width 30 cm
Bed Depth 30 cm
Build Height 40 cm
Resolution Z axis 0.1 mm
Extruder properties
Number of extruders 1
Nozzle diameter 0.4
Filament types PLA, PETG
Filament diameter 1.75 mm
Hot-end type MK8
Max. hot-end temperature 260 °C
Bowden

Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here

Max. heated bed. temp. 110 °C
Dimensions
Width 60 cm
Height 59 cm
Depth 61 cm
General
Stepper drivers 4
Screen type 128x64 Graphical
Control buttons 1
Features
SD-card

A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.

Heated bed

A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.

More info

Auto Bed Leveling

The auto bed leveling feature will probe the buildplate on a few different points. This allows the 3D printer to detect deviations in the buildplate and adjust the print accordingly. This makes is much easier to start a print as you don't have to manually adjust the bed position.

Camera
WIFI

This feature allows your printer to be controlled over a WIFI network. You can execute movements as well as start a print.

Network

This feature allows your printer to be controlled over a Ethernet network. You can execute movements as well as start a print.

$ 583.83  incl VAT In stock
Dispatches same business day!

Spare Parts

Replacement parts for the CR-10S pro, which may wear down over time.

Extruder parts

MK8 - Brass Nozzle ( 0.40 mm / 1.75 mm )
ReprapWorld
Generic MK8 nozzle compatible with many 3D printers
  $ 8.71
PC4-M10 - Push Fitting for 4mm PTFE tubing
ReprapWorld
Straight fitting for PTFE tubing, compatible with Creality hotends
  $ 3.63
Hotend kit for CR10 series (1.75 mm)
Creality 3D
Original hotend kit for Creality 3D printers
  $ 48.10

Supplies

CR-10S pro related products to keep you running.

Buildplate Adhesives

Adhesion spray 400ml|ABS, PLA and PETG
3DLAC
Your best defense against warping and prints loosening from the bed
  $ 13.92
Plus Adhesion spray 100ml|ABS, PLA and PETG
3DLAC
Your best defense against warping and prints loosening from the bed
  $ 9.08

Extruder parts

Blue Silicone Socks (3pcs)|MK7/MK8/MK9
Micro Swiss
High temperature non-stick silicone socks, compatible with multiple hotends
  $ 11.50
Silicone sock for MK10 hotend (Black)
Protection against hotend heat dispensation for MK10 and Creality hotends
  $ 3.51

Filament

High-quality PLA filament|Black 1.75 mm / 1 kg
REAL Filament
Best choice PLA filament for the best results
  $ 30.86
RepRapFilament PLA|Red 1.75 mm / 1 kg
ReprapWorld
Great value PLA filament by ReprapWorld
  $ 22.99

Lubrication and maintenance

Super lube ( 7 ml )
Perfect for lubrication of bearings and linear sliders
  $ 9.08

Upgrades

Suggested improvements for your CR-10S pro.

Extruder parts

Official Capricorn TL PTFE tubing set for Creality 3D printers
Capricorn
  $ 36.00
Official Capricorn XS PTFE tubing set for Creality 3D printers
Capricorn
  $ 36.00
All Metal Hotend Kit for Creality 3D printers|1.75mm filament
Micro Swiss
High quality full metal hotend with titanium heatbreak, compatible with MK8 hotends
  $ 89.54
Heater Block Upgrade for CR10 with Silicone Sock
Micro Swiss
Set of high-quality heater block and accessories, compatible with different printers
  $ 15.43

Buildplates

CR10S Pro Ultrabase carbon build plate ( 310x320x4mm )
Creality 3D
Ultrabase Silicon Carbon coated glass build surface upgrade for CR-10S Pro
  $ 44.47

About ReprapWorld
ReprapWorld

ReprapWorld is the number one webshop for all your reprap supplies for your 3D printer. We have a large collection of 3D printer components, from our famous electronics lines to filament from our own production. And everything is at a very competitive price!

Contact

RepRapWorld B.V.
Klopperman 7
2292JE Wateringen
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2021 | ReprapWorld B.V.