Mechanical endstop PCB v1.1

 - Product Information
Microswitch preassembled onto a PCB to be used as endstop for axes on your 3D printer or CNC machine. Compatible with all major electronics boards.
excl € 2.99 
1x € 1.50 
Price breaks
1 - 4: excl € 2.99 
5 - 9: excl € 2.84 
10 - ...: excl € 2.69 
Need a larger quantity? Contact our Sales department.

Product information

ENDSTOPPCBMECH

8719128326740

>500

Endstops

Documentation

Product description

Microswitch preassembled onto a PCB to be used as endstop for axes on your 3D printer or CNC machine. Compatible with all major electronics boards.

This great endstop solution provides you an easily mountable PCB for establishing home positions on the various axes of your 3D printer and CNC machine. Like our optical endstop solution, you can easily hook this board up to your electronics using a 3-wire cable. The microswitch should be hit by a carriage on your axis for example, to trigger a detection signal. This way your electronics can detect when an axis hits it's home position for example. This product has the following features:

  • Green detection LED, turning on upon detection
  • 3v3 as well as 5v compatible
  • Screw terminal as well as a 3-pin header to connect the board to your electronics
  • Nice, compact black painted PCB
  • High-quality SMD components

On the pcb are a screw terminal header and 3-pin header, allowing you to connect the endstop with a 3-way wire to your electronics. The module will work fine with either 3v3 or 5v input, so you can use it on the Ultratronics board as well. Connect the 3v3/5v input to the + pin, connect the - to the corresponding pin on your electronics and the detection pin to S. You will need to enable the pull-ups in your firmware when using this module and put inverting to true, as the module will give a LOW signal when it measures detection.

The Mechanical end stop pcb has two 3mm mounting holes for mounting the board to your 3D printer or CNC machine. Refer to the drawing for details of the placement of the holes.

Specifications

Dimensions

Width 16 mm
Length 40 mm
Height 15 mm
Mounting hole size 3 mm

Electrical specifications

Operating voltage 3V3 / 5 V
Price breaks
1 - 4: excl € 2.99 
5 - 9: excl € 2.84 
10 - ...: excl € 2.69 
Need a larger quantity? Contact our Sales department.

Dimensions

Width 16 mm
Length 40 mm
Height 15 mm
Mounting hole size 3 mm

Electrical specifications

Operating voltage 3V3 / 5 V
Description

By using this module, you will get a very precise method home detection compared to regular micro-switches. The opto end stop PCB includes a optical sensor TCST-2103, which works by emitting a infra-red light onto a light sensor (Phototransistor). By blocking the light, with a flag for example, the sensor will report a detection. This way your electronics can detect when an axis hits it's home position for example. This product has the following features:

  • Green detection LED, turning off upon detection
  • 3v3 as well as 5v compatible
  • Screw terminal as well as a 3-pin header to connect the board to your electronics
  • Nice, compact black painted PCB

On the pcb are a screw terminal header and 3-pin header, allowing you to connect the endstop with a 3-way wire to your electronics. The module will work fine with either 3v3 or 5v input, so you can use it on the Ultratronics board as well. Connect the 3v3/5v input to the vcc pin, connect the - to the GND pin and the detection pin to SIG. You will need to disable the pull-ups in your firmware when using this module and put inverting to false, as the module will give a HIGH signal when it measures detection.

The opto end stop pcb has two 3mm mounting holes for mounting the board to your 3D printer or CNC machine. Refer to the drawing for details of the placement of the hole. As the holes are on the same position as our mechanical endstop, it allows for easy upgrading.

Description Assembled optical (opto) endstop module with the Vishay TCST-2103, for reliable homing detection. Compatible with all our electronics boards.   More info More info Name Opto endstop PCB TCST-2103 Weight unit Gram(s) Weight No information/text available Favorites Favorites Shipping time

About RepRapWorld
ReprapWorld

ReprapWorld is the number one webshop for all your reprap supplies for your 3D printer. We have a large collection of 3D printer components, from our famous electronics lines to filament from our own production. And everything is at a very competitive price!

Contact

RepRapWorld B.V.
Wagenmaker 6a
2631RL Nootdorp
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2017 | RepRapWorld B.V.