DRV8825 Stepstick 1/32 microstep Stepper Motor Driver

 - Product Information
Pololu-compatible 2A 1/32 microsteps modular stepper driver, to control stepper motors from your 3D printer electronics. This compact PCB is compatible with Megatronics, RAMPS and Ultratronics.
excl € 8.49 
1x € 1.25 
1x € 3.99 
Price breaks
1 - 3: excl € 8.49 
4 - 29: excl € 6.79 
30 - ...: excl € 6.37 
Need a larger quantity? Contact our Sales department.

Product information

STEPSTICK8825

8719128324371

>1000

RAMPS

Documentation

Product description

Pololu-compatible 2A 1/32 microsteps modular stepper driver, to control stepper motors from your 3D printer electronics. This compact PCB is compatible with Megatronics, RAMPS and Ultratronics.

The Stepstick DRV8825 is a high power stepper driver PCB, capable of running your stepper motors at 1/32 microstepping. It can deliver up to 2A of current with sufficient cooling. It performs mostly equal to the Pololu version, but at a better price. This is a four layer PCB compatible with Pololu stepper drivers so it's an easy replacement and will work in all electronics boards with Pololu compatible stepper driver slots. You can connect this board to any of the stepper motors we carry in our shop.

You can set the microstepping mode with the three pins that are broken out. Mostly you can do this on your electronics board. You can follow the settings in this table for the different microstepping mode setting:

DRV8825 microstepping modes

 To avoid damage to the electronics, before placing the Stepstick onto your electronics board, make sure to have the VMot pin (8-35V in) aligned with the pin providing the power supply.

Specifications

Stepper driver

Chip DRV8825
Step resolution 1/32
Max current 2.2 A
Min. input voltage 8.2 V
Max. input voltage 35 V
Decay adjustable No
Current adjustable Yes
Pololu compatible Yes
Price breaks
1 - 3: excl € 8.49 
4 - 29: excl € 6.79 
30 - ...: excl € 6.37 
Need a larger quantity? Contact our Sales department.

Stepper driver

Chip DRV8825
Step resolution 1/32
Max current 2.2 A
Min. input voltage 8.2 V
Max. input voltage 35 V
Decay adjustable No
Current adjustable Yes
Pololu compatible Yes
Description

This product is a carrier board or breakout board for TI’s DRV8825 stepper motor driver; we therefore recommend careful reading of the DRV8825 datasheet (1MB pdf) before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2.2 A output current per coil (see the Power Dissipation Considerations section below for more information).

Description DRV8825 Stepper Motor Driver Carrier, High Current   More info More info Name Pololu DRV8825 Driver Carrier Weight unit Gram(s) Weight No information/text available Favorites Favorites Shipping time
Description

This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional cooling). This board ships with 0.1″ male header pins included but not soldered in.

Overview

This product is a carrier board or breakout board for Allegro’s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection; we therefore recommend careful reading of the A4988 datasheet before using this product. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil (see the Power Dissipation Considerations section below for more information). Here are some of the driver’s key features:

  •     Simple step and direction control interface
  •     Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step
  •     Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
  •     Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
  •     Over-temperature thermal shutdown, under-voltage lockout, and crossover-current protection
  •     Short-to-ground and shorted-load protection

 

Description Official Pololu 2A stepper driver for driving stepper motors in your 3D printer   More info More info Name Pololu A4988 Stepper Motor Driver Carrier Weight unit Gram(s) Weight No information/text available Favorites Favorites Shipping time

About RepRapWorld
ReprapWorld

ReprapWorld is the number one webshop for all your reprap supplies for your 3D printer. We have a large collection of 3D printer components, from our famous electronics lines to filament from our own production. And everything is at a very competitive price!

Contact

RepRapWorld B.V.
Wagenmaker 6a
2631RL Nootdorp
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2017 | RepRapWorld B.V.