Megatronics v3.1 - Prusa/MendelMax kit

 - Product Information
The new powerful electronics for any RepRap!
excl € 169.99 
Price breaks
1 - 9: excl € 169.99 
10 - 29: excl € 164.99 
30 - ...: excl € 159.99 
Need a larger quantity? Contact our Sales department.

Product information

MEGATRONICSV3PRUSA

8719128324999

0

Megatronics

Product description

The new powerful electronics for any RepRap!

Megatronics is based on many famous open-source products including: Arduino Mega, RAMPS, SD Ramps. Therefor this product is an already proven design. It combines all major features of these board into a single board solution for more reliable 3D-printing. This board will get you the most features for the best price! 

Megatronics has a powerful Atmega2560 processor with 256 kB memory, running at 16Mhz. The board can be connected to a PC using a normal USB cable. It will register as FTDI FT232R device. The board is compatible with the Arduino Mega 2560 and will therefor be easily programmed from the Arduino IDE.

This is only the board. Stepper drivers are not included.

Major features

Atmega2560
Powerful Atmega2560 processor with 256 kB memory, running at 16Mhz

Thermo couple (2x)
On board support for connecting two thermo couples

SD Card
Autonomous printing from Micro SD card on board, also an external SD card is supported

LCD support
Hooking up a LCD is pretty easy. The Wiring is compatible with most LCD screens. We do not sell the required wiring yet, but you can use 6x2-wire cable.

Six MOSFETs
The board has 3 MOSFETs (3x 25A) to support  extruders, 2 MOSFETs fior fans and 1 MOSFET (IRLS3034PBF) for the heated bed

Four thermistors
Four thermistors are supported.

Up to 6 stepper drivers
Compatible with RAMPS, 6 slots for stepper drivers (not included). Modularized to make replacement easy for damaged drivers. This board also support the new DRV8825 driver from Pololu http://www.pololu.com/catalog/product/2132.

Support for many peripherals
The board's functions can be easily extended with LCD, keypad etc. See the connectors section for more information

Other features

  • USB 2.0 Full Speed compatible
  • Auto reset can be disabled by removing a jumper
  • The board can be powered from 12-24V
  • The LCD contrast can be adjusted with a trimpot
  • The 5V line is protected by a 500mA resettable fuse
  • A piezo is included to allow the printer to give feedback with sound
  • Each stepper driver slot has a breakout to connect external stepper drivers to the board.
  • Four layer high quality PCB board

Board dimensions

Width: 109.5mm
Length: 90.5mm
Height: 18mm

Datasheet: Coming soon
Marlin firmware: See download section (service -> software downloads)

 

Kit contents

This is a kit of the following items.
Quantity Stock Product
2x 2-wire 24AWG cable, Red Black (1m)
3x 3-wire cable 24AWG, Red Black Yellow (1m)
4x DRV8825 Stepstick 1/32 microstep Stepper Motor Driver
1x Heater wire black 1m (rated 5A)
1x Heater wire Red 1m (rated 5A)
1x Thermal glue / heatsink plaster
5x NEMA17 Stepper motor / 1.8° step / 4.8 kg.cm
1x Megatronics v3.1 - Controller board
4x Heatsink for pololu / stepstick stepper drivers
3x Mechanical endstop PCB v1.1
5x 4-wire cable 24AWG, Red Blue Green Black (1m)
Price breaks
1 - 9: excl € 169.99 
10 - 29: excl € 164.99 
30 - ...: excl € 159.99 
Need a larger quantity? Contact our Sales department.
Description

 

Character Size H-W 2.95 x 4.75mm
Colour Blue/white
Display Type Reflective STN
External Dimensions H-W-D 98 x 60 x 9.5mm
Fixing Hole Diameter 2.5mm
Number Of Characters - Lines 20 x 4
Operating Temperature Range -20 → +70°C

Tutorial on how to hook up to RAMPS:
LCD and RAMPS
You can use 2x2-wire cables and 1x4wire cable to hook it up. You will need to connect pin 15 and 16 for back light.

Character Size H-W 2.95 x 4.75mm
Colour Yellow-Green
Display Type Reflective STN
External Dimensions H-W-D 98 x 60 x 9.5mm
Fixing Hole Diameter 2.5mm
Number Of Characters - Lines 20 x 4
Operating Temperature Range -20 → +70°C
Description Good value blue LCD with 4 lines of 20 characters in white enabling you to autonomously control your 3D printer   More info More info Name LCD - 20X4 - blue/white Weight unit Gram(s) Weight No information/text available Favorites Favorites Shipping time

About RepRapWorld
ReprapWorld

ReprapWorld is the number one webshop for all your reprap supplies for your 3D printer. We have a large collection of 3D printer components, from our famous electronics lines to filament from our own production. And everything is at a very competitive price!

Contact

RepRapWorld B.V.
Wagenmaker 6a
2631RL Nootdorp
The Netherlands

Email: info@reprapworld.com
Tel: +31 (0) 85 - 009 15 31

Copyright 2009 - 2017 | RepRapWorld B.V.