affordable ABS filament with consistent quality.
Black 1.75 mm / 1 kg
ABS, PLA and PETG
Product description
Great ABS filament Yellow 1.75 mm 1000 g for 3D printers. eSun filament gives you an affordable material with consistent quality.
ABS (Acrylonitrile Butadiene Styrene) filament has been in use for 3D printing for a long time. It used to be the most popular 3D print material, but due to the properties of ABS including high shrinkage it's hard to work with. Compared to other materials ABS still has some advantages including that its gasoline resistant, non-translucent and a soft bendable thermoplastic. Also compared to PLA it has a much higher glass transition point. ABS is an oil based product, making it less environmentally friendly than PLA is, and while printing it tends to give a bad chemical smell, so you probably want to use this in well ventilated conditions.
This filament will require more effort to print well. If you are using ABS to print small strong parts, you may get away with just using 3DLAC on a 65-80 degrees heated bed. Kapton tape is another product where ABS will print on, but it will require a higher temperatures around 110 degrees. For extruding the filament we recommend a temperature of 245 degrees, although it may extrude as low as 220 degrees, the layer bonding won't be as strong. For larger prints you should look into PETG filament first, without a heated chamber you will not be able to print this material without warping and cracking.
The Real ABS comes in many different colors directly from stock. For larger quantities and custom batches, feel free to contact our sales department.
Specifications
| sku | ABSYELLOW1000MM175 |
|---|---|
| gtin | 6922572221147 |
| Filament properties | |
| Weight filament | 1000 g |
|
Material The base material used in the filament. For more information on the different materials, please check the Filament information page |
ABS |
| Variant | ABS |
| Approx. color code | Pantone 109C |
| Color | Yellow |
| Diameter | 1.75 mm |
| Diameter tolerance | 0.05 mm |
| Printing properties | |
| Temperature - extruder | 230 - 250 °C |
| Temperature - heated bed | 60 - 70 °C |
| Heated bed temp. - Kapton | 90 - 110 °C |
|
Ease of use How much 3D printing experience is recommended before using this material. |
|
|
Printbed adhesion Determines how easy the material adheres to the printbed and can be removed from the bed without damaging either the bed or the print. |
|
|
Printing speed The speed at which the material can be extruded. This is determined by how fast it melts and how viscous it is. |
|
|
Odor How much smell does the filament produce while printing and how bad is the smell. More stars is better |
|
| Material Properties | |
|
Toughness How tough is the material. From 1 star (very brittle) to very tough |
|
|
Outdoor Resistance How well can this product be used in an outside environment. The material has to be able to withstand UV-radiation from the sun as well as water and cold weather. |
|
|
Impact strength The amount of energy that a material can withstand when a load is suddenly applied to it. It may also be defined as the threshold of force per unit area before the material undergoes fracture/ |
|
|
Deformation temp. How well can the material handle temperatures before it starts to deform. |
|
| Spool dimensions | |
| Outer diameter | 200 mm |
| Inner diameter | 50 mm |
| Width | 65 mm |
| Weight spool | 300 g |
| Length filament | 400 m |
| 1 - 9: | excl $ 19.75 |
| 10 - 29: | excl $ 18.75 |
| 30 - : | excl $ 18 |
| Need a larger quantity? Contact our Sales department. | |
Related productsRelated products
Discover products that go hand in hand with the ABS filament Yellow 1.75 mm / 1 kg eSun. These are products that have been purchased the most with the ABS filament Yellow 1.75 mm / 1 kg eSun. Do not miss out on items that will cut down on time, boost efficiency, and provide the best experience.
