3DLAC Adhesives allow you to 3D print without worrying about warping or prints coming off the build plate. Easy to apply and available in multiple packages.
For most people the 3DLAC 400ml can is most cost efficient and can be used for at least 100 3D prints. Just spray a bit to the build surface of your printer and start a 3D print.As easy as that!
Alternatively the 3DLAC 100ml bottle is available, which is not pressurized. Easy to use for many 3D-prints and a bit more affordable. However, compared to the 400ml package the spray is less distributed over the build surface.
New in the product line is the 3DLAC 80ML glue stick, which allows you to apply the 3Dlac directly onto the surface. The reduces residue on 3D printer components, making it safer for your printer. But the volume is a bit less and it takes more time to apply. Also the glue stick can be shipped easily as it has no hazard signs, which also makes it safer to use.
3DLAC adhesives sprays and stick work great with a variety of 3D printing materials, including PLA, ABS and PETG. Just apply the 3DLAC to your build surface, which can be glass or any other material, and heat up the platform to the applicable temperature. After the print is done, let the platform cool and wait for the print to pop off. In some cases you may need a sharp spatula to remove a larger 3D print. The following table gives a guideline to the recommended temperature for the materials: