Explore the world of 3D printing with the Ender-3 Neo 3D printer by Creality in this unique offer. This entry-level machine is great to start your adventure to become a maker. Thanks to the new CR-touch auto bed leveling system starting a 3D print is easy, the machine will do a 16 point calibration to detect any inconsistencies. The 220 x 220 x 250mm build volume is big enough for most creations, while the machine dimensions of 440 x 440 x 465mm fit on any desk. This kit comes with everything you need to start 3D printing immediately!
The printer comes with only a small piece of filament, but with this offer you can start printing right away! Let us know if you want the change the colors included with this kit.
This is a kit of the following items.
|1x||Adhesion spray 400ml - ABS, PLA and PETG|
|1x||High-quality PLA filament - Blue 1.75 mm / 1 kg|
|1x||High-quality PLA filament - Red 1.75 mm / 1 kg|
|Hotend type||MK8 Compatible|
|Hot-end type||MK8 Compatible|
|Max. hot-end temperature||260 °C|
|3D printer properties|
|Max. heated bed. temp.||100 °C|
|Type of 3D printer||FDM/FFF|
For most entry-level, smaller 3D printers this is a single threaded rod. For bigger machines the Z-axis moves with two rods, while 3D printers with a bed plate that moves in the Z-axis typically have three or four rods to move.
Bed movement direction
The direction the buildplate moves. Most printers move the build plate in the Y-axis direction. This is a simpler design, but gives problems at greater build height, because the inertia of the mass of the buildplate + 3D print impact the quality of the layers, requiring you to limit the speed. Other printers move in the Z-axis, allowing you to print faster without trading quality of the layer build-up.
Compatible diameter filament
This product is compatible with the specified filament diameter.
|Display type||128x64 Graphical LCD|
|Type of control interface||Rotary encoder with push button|
Bed level sensor
Type of bed leveling sensor to do the bed leveling procedure.
|Input voltage||100/240 V|
|Operating voltage||24 V|
|Max. Power rating||350 W|
|Plug type||EU Plug|
|Filament diameter||1.75 mm|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
Discover all the parts and accessories that you can use with the Ender 3 Neo Start kit - 3D printer + filament + 3DLac. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.