Wash & Cure Plus

The Anycubic 3D Wash & Cure Plus is the bigger brother of the Wash and Cure 2.0, giving you the possibility to finish your larger Resin 3D prints of up to 192x120x245mm in record time. You can wash your 3D prints using the washing program in up to an hour, during which the 3D prints will be cleaned of uncured resin thanks to the strong rotating flow.

The machine provides the option to either use the included basket or mount the 3D printer's build platform for convenience during washing. When using the the basket option the 3D print's size is limited to 192x120x290mm, while the platform reduces the available height to 235mm.

For curing the machine includes improved UV LEDs which provide a powerful 405nm light beam, curing your 3D print quickly and thoroughly. The rotating platform cures the 3D print from all directions and provides space for 190mm diameter objects with a maximum of 245mm in height.

The UV light cover block up to 99.95% of the UV light to protect both you as well as your 3D prints and the machine will pause immediately after the cover is removed for safety. We recommend using gloves while handling 3D resin and work in a well-ventilated room.

The Wash and cure Plus has a 40W max rating which is very efficient, while the machine is is easy to use and setup in minutes. So if you have a big 3D resin printer, make sure to order the Wash & Cure Plus to accompany it for the best 3D print results!